| Nama Wahi | PD080SY3 |
| Waitohu | E Ink |
| Rahi | 8.0 |
| Taupānga | IA |
| Whakatau | 800×600 |
| Te tito | LCM |
| Tirohanga | 250 |
| CR | 500:1 |
| Nga Tae | 262K |
| Whakamuri | WLED |
| Atanga | TTL |
| panel brand | PVI |
| panel model | PD080SY3 |
| panel type | a-Si TFT-LCD , LCM |
| panel size | 8.0 inch |
| resolution | 800(RGB)×600 , SVGA |
| display mode | TN, Normally White, Transmissive |
| active area | 162×121.5 mm |
| outline | 183×141×6.6 mm |
| surface | Antiglare |
| brightness | 250 cd/m² (Typ.) |
| contrast ratio | 500:1 (Typ.) |
| display colors | 262K (6-bit) |
| response time | 15/25 (Typ.)(Tr/Td) |
| viewing angle | 70/70/50/70 (Typ.)(CR≥10)(L/R/U/D) |
| frequency | 60Hz |
| lamp type | 3S9PWLEDWithout Driver |
| signal interface | Parallel RGB (1 ch, 6-bit), 60 pins |
| input voltage | 3.3/7.7/15.5/-6.5V (Typ.)(VCC/AVDD/VGH/VGL) |
| application | IA |
| AT080TN42 | Innolux | 8.0 | 800×600 |
| CLAA080LG02AW | CPT | 8.0 | 800×480 |
| L5F30614T23 | SANYO | 8.0 | 800×480 |
| LS080HT111 | Innolux | 8.0 | 800×600 |
| N080ICE-GB0 Rev.A1 | Innolux | 8.0 | 800×1280 |
| PD080SL1 | E Ink | 8.0 | 800×600 |
| PD080SL2 | E Ink | 8.0 | 800×600 |
| PD080SL3 | E Ink | 8.0 | 800×600 |
| PD080SL5 | E Ink | 8.0 | 800×600 |
| PD080SY1 | E Ink | 8.0 | 800×600 |
| DLC0570BDG-T-2 | Other | 5.7 | 640×480 |
| DMF-51043NFU-FW-1 | Kyocera | 9.4 | 640×480 |
| G070Y3-T01 | Innolux | 7.0 | 800×480 |
| G084SN05 V8 | AUO | 8.4 | 800×600 |
| HSD190MEN4-A03 | HannStar | 19.0 | 1280×1024 |
| LM-CJ53-22NAK | SANYO | 10.4 | 640×480 |
| LQ104V1LG81 | SHARP | 10.4 | 640×480 |
| LTA090A220F | TOSHIBA | 9.0 | 800×480 |
| OEL9M0073-Y-E | Other | 1.0 | 128×64 |
| SX19V007-Z2A | KOE | 7.5 | 640×480 |