| Nama Wahi | TMT102DMAGSD |
| Waitohu | Tianma |
| Rahi | 10.2 |
| Taupānga | DPF |
| Whakatau | 800×480 |
| Te tito | LCM |
| Tirohanga | 350 |
| CR | 300:1 |
| Nga Tae | 262K |
| Whakamuri | CCFL |
| Atanga | TTL |
| panel brand | TIANMA |
| panel model | TMT102DMAGSD |
| panel type | a-Si TFT-LCD , LCM |
| panel size | 10.2 inch |
| resolution | 800(RGB)×480 , WVGA |
| display mode | TN, Normally White, Transmissive |
| active area | 222×132.48 mm |
| outline | 235×145.8 mm |
| surface | Antiglare |
| brightness | 350 cd/m² (Typ.) |
| contrast ratio | 300:1 (Typ.) |
| display colors | 262K (6-bit) |
| response time | 15/35 (Typ.)(Tr/Td) |
| viewing angle | 60/60/40/60 (Typ.)(CR≥10)(L/R/U/D) |
| lamp type | 1 pcsCCFL |
| signal interface | Parallel RGB (1 ch, 6-bit) |
| input voltage | 3.3/8.4/15/-10V (Typ.)(VCC/AVDD/VGH/VGL) |
| application | DPF |
| AT102TN42 | Innolux | 10.2 | 1024×600 |
| C102EVN01.0 | AUO | 10.2 | 1280×720 |
| CLAA102NA01CW | CPT | 10.2 | 1024×600 |
| CLAA102NA0ACW | CPT | 10.2 | 1024×600 |
| CLAA102NA0DCW | CPT | 10.2 | 1024×600 |
| CLAA102NA1BCN | CPT | 10.2 | 1024×600 |
| CLAA102NA2CCN | CPT | 10.2 | 1024×600 |
| CLAA102NC01CW | CPT | 10.2 | 1024×600 |
| TM102WV-A02-03 | SANYO | 10.2 | 800×480 |
| TX26D30VM1AAA | KOE | 10.2 | 800×256 |
| A070SN02 V0 | AUO | 7.0 | 800×600 |
| A080SN01 V8 | AUO | 8.0 | 800×600 |
| A080SN03 V0 | AUO | 8.0 | 800×600 |
| AT090TN10 | Innolux | 9.0 | 800×480 |
| CLAA080MB0DCW | CPT | 8.0 | 800×600 |
| HSD070IDW1-A21 | HannStar | 7.0 | 800×480 |
| HSD090ICW1-A00 | HannStar | 9.0 | 640×234 |
| HSD100IFW1-C01 | HannStar | 10.1 | 1024×600 |
| LQ070Y3DG04 | SHARP | 7.0 | 800×480 |
| TM102WV-A02-03 | SANYO | 10.2 | 800×480 |