| Nama Wahi | UG-6032CSWBGA2 |
| Waitohu | WiseChip |
| Rahi | 1.8 |
| Taupānga | Wearable |
| Whakatau | 160×32 |
| Te tito | OLED , PM-OLED |
| Tirohanga | |
| CR | 10000:1 |
| Nga Tae | Mono(White) |
| Whakamuri | self |
| Atanga | 3/4-wire |
| manufacturer | WiseChip |
| screen size | 1.8 inch |
| pixel number | 160×32 90PPI |
| active area(mm) | 45.096 × 9 (H×V) |
| bezel area(mm) | 45.89 × 9.8 (H×V) |
| luminance | 600 cd/m² (Typ.) |
| viewing angle | - |
| good view at | Symmetry |
| color depth | Mono(White) |
| mass | 0.50±0.05g |
| refresh rate | - |
| driver ic list | Built-in COG SSD1320 |
| signal type | 3/4-wire SPI, I²C , 18 pins FPC |
| voltage supply | 2.8/12V (Typ.)(VDD/VCC) |
| max. ratings | Storage Temp.: -40 ~ 75 °C Operating Temp.: -40 ~ 60 °C |
| model name | UG-6032CSWBGA2 |
| screen type | OLED , PM-OLED |
| arrangement | Rectangle |
| outline(mm) | 55.3 × 14.9 × 0.35 (H×V×D) |
| treatment | - |
| contrast ratio | 10000 : 1 (Typ.) (TM) |
| response | - |
| work mode | - |
| backlight | self , 3K hours |
| used for | Wearable |
| touchscreen | Without |
| A018AN03 V1 | AUO | 1.8 | 280×220 |
| EPW1802AA | Futaba | 1.8 | 160×32 |
| LCX036AMT | SONY | 1.8 | 1604×1204 |
| LM18WGSBZ05 | SHARP | 1.8 | 120×160 |
| P18BD2 | E Ink | 1.8 | 480×234 |
| RGS18160128FH003 | RiTdisplay | 1.8 | 160×128 |
| RGS18160128FH007 | RiTdisplay | 1.8 | 160×128 |
| TM018FDZ02 | Tianma | 1.8 | 128×160 |
| TM018FDZ12 | Tianma | 1.8 | 128×160 |
| UP018D11 | UNIPAC | 1.8 | 528×220(dot) |