| Nama Wahi | TCG121SVLQAPFA-AA20 |
| Waitohu | Kyocera |
| Rahi | 12.1 |
| Taupānga | Industrial |
| Whakatau | 800×600 |
| Te tito | a-Si TFT-LCD, LCM |
| Tirohanga | |
| CR | 360:1 |
| Nga Tae | 16.2M |
| Whakamuri | WLED |
| Atanga | CMOS |
| panel brand | Kyocera |
| panel model | TCG121SVLQAPFA-AA20 |
| panel size | 12.1" |
| panel type | a-Si TFT-LCD, LCM |
| resolution | 800(RGB)×600, SVGA, 82PPI |
| pixel format | RGB Vertical Stripe |
| display area | 246(W)×184.5(H) mm |
| bezel opening | - |
| outline size | 278.3(W)×207.5(H) ×12.8(D) mm |
| surface | Antiglare, Hard coating (2H) |
| brightness | 500 cd/m² (Typ.) |
| contrast ratio | 360:1 (Typ.) (TM) |
| viewing angle | 85/85/85/85 (Typ.)(CR≥10) |
| display mode | AWV, Normally Black, Transmissive |
| best view on | Symmetry |
| response time | 18/12 (Typ.)(Tr/Td) |
| display colors | 16.2M 50% NTSC |
| lamp type | WLED , 100K hours , With LED Driver |
| frequency | 60Hz |
| touch screen | 4-wire Resistive Touch |
| panel weight | 670g (Typ.) |
| application | Industrial |
| signal interface | CMOS (1 ch, 8-bit) , 30 pins Connector |
| input voltage | 3.3V (Typ.) |
| environment | Operating Temp.: -20 ~ 70 °C ; Storage Temp.: -30 ~ 80 °C |
| AA121SL01 | Mitsubishi | 12.1 | 800×600 |
| AA121SL12 | Mitsubishi | 12.1 | 800×600 |
| HT12X21-221 | HYDIS | 12.1 | 1024×768 |
| LQ121S1LG45 | SHARP | 12.1 | 800×600 |
| LQ121X3LG02 | SHARP | 12.1 | 1024×768 |
| LTD121C31S | TOSHIBA | 12.1 | 800×600 |
| LTD121EX1S | TOSHIBA | 12.1 | 1280×768 |
| LTM12C285 | TOSHIBA | 12.1 | 800×600 |
| NL10276BC24-13 | NLT | 12.1 | 1024×768 |
| TCG121SVLQAPNN-AN20 | Kyocera | 12.1 | 800×600 |