| Nama Wahi | L5S30878P01 |
| Waitohu | Epson |
| Rahi | 3.0 |
| Taupānga | HHP |
| Whakatau | 240×400 |
| Te tito | LCM |
| Tirohanga | 200 |
| CR | 180:1 |
| Nga Tae | 262K |
| Whakamuri | WLED |
| Atanga | TTL |
| panel brand | Epson |
| panel model | L5S30878P01 |
| panel type | a-Si TFT-LCD , LCM |
| panel size | 3.0 inch |
| resolution | 240(RGB)×400 , WQVGA |
| display mode | TN, Normally White, Transflective |
| active area | 39.24×65.4 mm |
| outline | 45.15×76.6×4.32 mm |
| surface | |
| brightness | 200 cd/m² (Typ.) |
| contrast ratio | 180:1 (Typ.)(Transmissive)18:1 (Typ.)(Reflective) |
| display colors | 262K (6-bit), CIE193137% |
| response time | 6/25 (Typ.)(Tr/Td) |
| viewing angle | 60/60/45/45 (Typ.)(CR≥10)(L/R/U/D) |
| frequency | 60Hz |
| lamp type | 3S2PWLEDWithout Driver |
| signal interface | Parallel RGB (1 ch, 6-bit) + SPI, 45 pins |
| input voltage | 3.0/3.0V (Typ.)(VDD/VDDI) |
| application | HHP |
| A030DN04 V0 | AUO | 3.0 | 320×240 |
| A030FL01 V2 | AUO | 3.0 | 480×272 |
| C-51505NFQJ-LW-ALN | Kyocera | 3.0 | 20×2 |
| DMC-20261NYJ-LY-CDE-CKN | Kyocera | 3.0 | 20×2 |
| DMC-20261NYJ-LY-CKE-CNN | Kyocera | 3.0 | 20×2 |
| EQ030AS181 | PDI | 3.0 | 320×240 |
| L5S30341P00 | SANYO | 12.1 | 800×600 |
| L5S30883P00 | SANYO | 4.5 | 480×240 |
| LQ030B7UB02 | SHARP | 3.0 | 240×400 |
| TM030LBHT1 | Tianma | 3.0 | 240×400 |
| 20QVF0H | SII | 2.0 | 240×320 |
| 24QVF1J | SII | 2.4 | 240×320 |
| LQ035Q7DB05 | SHARP | 3.5 | 240×320 |
| LQ039Q2DS51 | SHARP | 3.9 | 320×240 |
| LQ040Y3DX80 | SHARP | 4.0 | 480×800 |
| LQ043T1DG28 | SHARP | 4.3 | 480×272 |
| LS037V7DW03B | SHARP | 3.7 | 480×640 |
| PD035VX8 | E Ink | 3.5 | 480×640 |
| TX09D200VM0BAA | KOE | 3.5 | 240×320 |
| TX09D40VM3CBA | KOE | 3.5 | 240×320 |