| Nama Wahi | TX18D200VM0EWA |
| Waitohu | KOE |
| Rahi | 7.0 |
| Taupānga | Industrial Medical I |
| Whakatau | 1920×1080 |
| Te tito | LCM , a-Si TFT-LCD |
| Tirohanga | |
| CR | 800:1 |
| Nga Tae | 16.7M |
| Whakamuri | 3S10P |
| Atanga | LVDS |
| manufacturer | KOE |
| model name | TX18D200VM0EWA |
| screen size | 7.0 inch |
| screen type | LCM , a-Si TFT-LCD |
| pixel number | 1920(RGB)×1080 (FHD) 313PPI |
| arrangement | RGB Vertical Stripe |
| active area(mm) | 155.52 × 87.48 (H×V) |
| outline(mm) | 178.76 × 115 × 12.05 (H×V×D) |
| bezel area(mm) | - |
| treatment | Hard coating (7H) |
| luminance | 600 cd/m² (Typ.) |
| contrast ratio | 800 : 1 (Typ.) (TM) |
| viewing angle | 85/85/85/85 (Typ.)(CR≥10) |
| response | 23 (Typ.)(Tr+Td) ms |
| good view at | Symmetry |
| work mode | IPS-Pro, Normally Black, Transmissive |
| color depth | 16.7M 74% NTSC |
| backlight | 3S10P WLED , 70K hours , With LED Driver |
| mass | 240g (Typ.) |
| used for | Industrial Medical Imaging |
| refresh rate | 60Hz |
| touchscreen | PCAP |
| signal type | LVDS (1 ch, 8-bit) , 20 pins Connector |
| voltage supply | 3.3V (Typ.) |
| max. ratings | Storage Temp.: -30 ~ 80 °C Operating Temp.: -20 ~ 70 °C ; Vibration Level: 2.0G (19.6 m/s²) |
| A070VTN03.0 | AUO | 7.0 | 800×480 |
| C070VW04 V0 | AUO | 7.0 | 800×480 |
| CLAA070VA01 | CPT | 7.0 | 800×480 |
| DLC0700BZG-7 | Other | 7.0 | 800×480 |
| DLC0700YZG-T-6 | Other | 7.0 | 1024×600 |
| N070ICE-GB1 | Innolux | 7.0 | 800×1280 |
| N070ICE-GB2 | Innolux | 7.0 | 800×1280 |
| Q070LRE-LB1 | Innolux | 7.0 | 1024×600 |
| TM070DDH03 | Tianma | 7.0 | 1024×600 |
| TX18D200VM0EAA | KOE | 7.0 | 1920×1080 |